από georgek » Πέμ Σεπ 17, 2009 6:27 am
Και επειδη τις ιδιες ανησυχιες τις εχουν και αλλου, εκανα μερικα clopy-paste απο τα suzuki-forums και παμε με μερικες προτασεις οι οποιες δεν ξερω εαν ειναι και λυσεις:
"... if you want it to stay off after 19mph unplug one of the ABS wheel speed sensors..."
"... he speedometer will still work, but you have to disconnect one of the front sensors. you also will lose ABS and traction control. DO NOT UNPLUG THE FUSE as you will lose the electronic brake distribution (read: proportioning valve) and you will probably end up with a unsafe truck to drive......"
Οπότε μας λενε οι κυριοι οτι αν θελουμε να μην εχουμε esp και μετα τα 30km/h αποσυνδεουμε εναν απο τους μπροστινους σενσορες του ABS, ετσι εξακολουθει να δουλευει το ταχυμετρο αλλα βγαζουμε εκτος λειτουργιας και το ABS και το traction control. Επισης μας τονιζουν να μην βγαλουμε την ασφαλεια γιατι θα βγαλουμε εκτος τον κατανεμητη και θα εχουμε κανει χοντρη πατατα
Ενας αλλος τυπος μας δινει μια αλλη περιεργη εκδοχη :
"... There is an easier (and arguably safer) way to disable ESP:
I found this when I had some engine cutout problems:
While driving, turn the ignition off then back on and the ESP should have trouble
reinitializing because of the wheel speed.
If successful the ESP light will come on.
It may help to make a slight turn so the wheels are moving at different speeds to confuse
the computer.
I haven't played with this too much because I have no need to turn it off, but all you
snow driving whingers may want to try it out...."
Εχει μια λογικη ετσι πως το θετει αλλα δεν μας διευκρινιζει αν το αναψε σβησε γινεται απλα κυλωντας με νεκρα στο σασμαν ή με ταχυτητα και πατημενο συμπλεκτη.
Ενας αλλος πονηρουλης μας λεει να ξεγελασουμε τη σταθμη των υγρων φρενων :
"...Looking into service manual, low brake fluid level should disable ESP, leaving ABS and TCS still operational. I had no opportunity to test it, as winter is long gone...
(Well, the idea is NOT to drain the fluid, but fool the electronics by shorting fluid level sensor connector pins...)..."
Οποιος τολμηρος δοκιμασει ας μας πει και εμας ποια μεθοδος δουλευει ευκολα και σωστα.