από theo_ts » Τετ Σεπ 03, 2014 12:31 am
Κάνω copy- paste απο το manual
Start registering a unit by operating the Bluetooth device.
By operating the Bluetooth device, register the hands-free unit or audio unit (pairing).
Select "DPX5**BT" (for DPX500BT) from the list of found units.
If "PAIRING PASS ****** (Bluetooth device name) PRESS VOLUME KNOB" appears, proceed to step 4.
Input the PIN code ("0000") in the Bluetooth device.
Check that registration is complete on the Bluetooth device. PIN code is set to "0000" as the default. You can change this code.
See <17-1. Registering the PIN code>
"PAIRING PASS ****** (Bluetooth device name) PRESS VOLUME KNOB" appears.
Press the [Control knob].
Pairing starts. When is it completed, "PAIRING OK" appears.
About automatic connection of the iPod touch or iPhone through Bluetooth
This unit is compatible with an Apple Auto Pairing function. Connecting the iPod touch or iPhone to this unit with USB cable will automatically register it as a Bluetooth device. See <"AUTO PAIRING">.
1. The Bluetooth function of the iPod touch or iPhone is turned on first.
2. Connect an iPod touch or iPhone to the USB terminal.
3. Press the volume knob to pair once you have confirm the passcode.
17-5. Bluetooth detail setting
Description
"AUTO ANSWER"
Automatically answers a call after lapse of the preset time interval.
"OFF": Does not answer the phone call automatically.
"1" – "8" – "99":
Automatically answers the phone call after lapse of 1 – 99 seconds.
"RECONNECT"
When set to "ON", starts re-pairing with the registered Bluetooth device automatically when it becomes unpaired.
"ON" / "OFF"
"AUTO PAIRING"
When set to "ON", performs Bluetooth pairing automatically when the iPhone is connected to the USB terminal.
"ON" / "OFF"
"BT HF/AUDIO"
Specifies the output speakers for hands-free voice communication and Bluetooth audio sound.
"FRONT" : Outputs sound from the front speakers.
"ALL" : Outputs sound from the front and rear speakers.
"CALL BEEP"
Sets whether to output a beep from the speaker when a call comes in.
"ON" : Outputs a beep.
"OFF" : Does not output a beep.
"MIC GAIN"
Adjusts the sensitivity of the microphone for telephone call or adjusts the voice of the caller.
"-20" – "0" – "+8"
"ECHO CANCEL"
Sets the echo cancellation level.
"1" – "4" – "10"
(Colored text: Factory setting)
Use the [Control knob] to select a setting.
The previous item appears.
14-5. Bluetooth device registration test
You can check whether a Bluetooth device can be registered by operating this unit.
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
Use the [Control knob] to select "BT TEST MODE".
For how to use the [Control knob], refer to <3-3. How to select the item>.
"PLEASE PAIR YOUR PHONE" appears.
By operating the Bluetooth device, register the hands-free unit or audio unit (pairing).
Select "DPX5**BT" (for DPX500BT) from the list of found units.
If "(Bluetooth device name)" appears, proceed to step 6.
Input the PIN code ("0000") in the Bluetooth device.
Use the [Control knob] to select an Bluetooth device.
When pairing is completed successfully, a connection test starts automatically.
When the connection test is completed, test results are displayed on a function basis ("OK": Enabled; "NG": Disabled).
Display
Description
"PAIRING"
Registration in this unit
"HF CNT"
Hands-free phoning
"AUD CNT"
Audio playback
"PB DL"
Phone Book downloading
Press the [Control knob].
Exit the test mode.
•Τα όρια της ζωή σου ειναι απλως επινοήσεις του εαυτού σου.
•Εξερεύνησε, Ονειρέψου, Ανακάλυψε.
•Ακολούθησε τον δρόμο σου ως την άκρη. Η αξία του δρόμου είναι να μην σταματήσεις.